Cmd list wifi networks

How to manage wireless networks with Command Prompt on

Type the following command to view the wireless network profiles saved on your PC and press Enter: netsh wlan show profile You aren't limited to the Windows GUI to view available wireless networks. You can use the netsh command to do this. This command can be use from CMD or from PowerShell. To get a list of all available wireless networks, run the command below: netsh wlan show networks. For more details, including finding the signal strength, run this command: netsh wlan show networks mode=bssi When you need to manage your wireless network connections, using the Settings app or Control Panel may not be enough, and this is when the Netsh command-line utility in Windows comes in handy. In Windows 10, you can manage various aspects of your wireless network connections using the Settings app and Control Panel. However, sometimes you may need to perform more advanced tasks. For example, find the network security key from different Wi-Fi profiles stored on your computer, show. Option #1: Scan and list available WiFi networks using nmcli nmcli, a command line tool for controlling and reporting the network status, can scan and list available WiFi networks regardless of the WiFi being connected to a network or not. This should already be installed on your Linux distribution, it doesn't require specifying the interface name, and can work without super user (sudo) privileges by default or at least that's the case in my test on both Fedora and Ubuntu Open Settings, and click/tap on the Network & Internet icon. 2. Click/tap on Wi-Fi on the left side, and click/tap on the Manage known networks link on the right side. (see screenshot below) 3. You will now see a list of all wireless network profiles on your PC. (see screenshot below) That's it, Shawn

To list all Wi-Fi networks that are available (in range) on the command line, use: netsh wlan show networks Obs.: This command shows that the Wi-Fi network is currently connected, for a list of all available networks, discounting your current network first I think the command you are looking for is: iwlist wlan0 scan Which will show a list of available Wi-Fi networks. If you are connected to a network already you can see a list of the other devices on the network with: nmap To launch the terminal using a keyboard you can create a keyboard shortcut such as Ctrl+Alt+t. To do this first run

Getting wireless LAN network details To scan for wireless networks, use the command sudo iwlist wlan0 scan. This will list all available wireless networks, along with other useful information It's pretty easy to do a scan in the command line. The man pages are your friend here (check out iwconfig and iwlist). But using the C interface is a little more difficult so I'll focus on that. First of all, as other people have mentioned, definitely download out the wireless tools source code Netsh is very powerful to use not only in troubleshooting network related issues, but also for performing a query for information related to a wireless network. The command that I will be using to list out all of the available wireless networks within range is listed below: netsh wlan show network mode=bssi If you don't remember all commands, you can list all available options with the following command: netsh wlan. You should see the following screen: Conclusion. In this tutorial, you learned how to manage a wireless network with netsh command on Windows 10. We hope this will help you troubleshoot wireless network issues and perform day-to-day tasks How To Manage A Wireless WiFi Network from the Command Line in Windows 7. By. Kent Chen-August 3, 2011. 5. Windows 7 has got an intuitive GUI that makes you connect to any kind of Wireless network much easier than before. There is really no valid reason why you need or should use the command line to accomplish something that you can do the same through the GUI, other than, well, being cool.

After some research I found out you can use the inbuilt windows netsh command to display information about wireless networks that the client can see. An example of the command in action follows: C:\Users\bruce>netsh netsh>wlan netsh wlan>show /? The following commands are available: Commands inherited from the netsh context: show alias - Lists all defined aliases. show helper - Lists all the. Go to /sys/class/net you can see list of folders here. find wireless interface. It has wireless folder. for example in my case is wlp10 you can check it using ls wlp10. if the folder's name different use that folder's name. sudo iwlist wlp1s0 scan | grep ESSID; now from here you can list all available WiFi. source from her What is the command to refresh the wireless network connection list instead of clicking the refresh button manually. I using visual C++ to get list. I am running the program continuously, but list ge To see your active network connections in Windows, start by selecting Settings in your Start menu and going to Ethernet. Then, click on the Network and Sharing Center before choosing the icon that's next to Connections. On the next page, click on Details to display information about your network connection. Alternatively, if you're using Windows 7, open the Start menu and type NCPA.CPL into the search box. After the Network Connections folder opens, right click on the.

To use this tool to find nearby wifi networks, the first thing you'll want to do is create a symbolic link from the airport utility to /usr/sbin for easy access. The command for this varies per version of Mac OS in use, select which is relevant to your Mac OS X version on the Mac in question. Launch the Terminal and type the following command As you can find in linked answer, the general command to get the information you want is wmic nic where NetConnectionStatus=2 get NetConnectionID. With | more +1 you can pass the header that would be displayed in the wmic-command alone. To get this into a variable you want to parse the output of that command with for /f In Windows 7, you could easily get that from a viewable preferred wireless network list. In Windows 8, that was removed, and it has not yet returned. I decided to tackle this problem. I know from experience that netsh.exe will give me this data, but executables return text. To make this useful in PowerShell, I would have to parse the text to retrieve the wanted data and return a usable object. Windows 10 Settings - Go to Network & Internet In the column on the left, go to Wi-Fi, and on the right, click or tap Manage known networks. Manage known networks in Windows 10 Now you can manage all the networks that are known to Windows 10

Wireless Wi-Fi Hacking Commands in Windows 7,Best of

How to View Wireless Networks from Command Line in Windows

sudo iwpriv wlan0 private-command [private parameters] Now that your card is configured and connected to the wireless network, you need to configure your networking options to use it. If you are using DHCP on the network, you simply can run dhclient to query the DHCP server and get your IP address and other network settings. If you want to set. The cmd command to show the all the connected machines on the network, I'm looking for a command that is executed from the cmd (attached) to show all the connected machines on the network. Thank you. Best. Jamal. Type 'ipconfig/all' to show a list of all connected devices on the network

In this command, 'Wireless Network Connection' is the connection name of the W-Fi adapter, which you can see in Control Panel\Network and Internet\Network Connections: So, in my case, the commands could be as follows: Just for note: Windows usually connects to networks in this order: Ethernet ; Wi-Fi; Mobile broadband; When you connect to a new Wi-Fi network, it's added to the list, and. You can also get the same information using the command line, but the information will be less than the one provided by the system information tool. To get network interface information through the command line, just open the command prompt (open Start, type cmd, and select Command Prompt) and issue the following command: Ipconfig / all. This will show details about all the network interfaces. To add an allowed Wi-Fi network, run the following command, replacing WIFI NAME with the name (SSID) of the wireless network. netsh wlan add filter permission=allow ssid=WIFI NAME networktype=infrastructure. Repeat this process to add more networks to your Wi-Fi whitelist, if necessary. Once you've set a list of your whitelisted networks, run the following command to block all Wi-Fi. In some cases, the command netsh wlan show networks (from a Command Prompt window) may show the list of available Wi-Fi access points (SSIDs) correctly, but the GUI may indicate no wireless networks are available. Despite this problem, the Lock Screen may show the list of available Wi-Fi networks and you should be able to choose the network via the Wi-Fi icon in the bottom right corner. The. Step 1: Find available WiFi adapters - WiFi network from command line. This actually help. I mean you need to know your WiFi device name before you go an connect to a WiFi network. So just use the following command that will list all the connected WiFi adapters in your Linux machines

First, let us view the list of saved network connections and the wireless device name in your Linux system using command: $ nmcli connection. Or, shortly use this: $ nmcli c. The above command will list all saved network connections (both wired and wireless) in your Linux machine Create a new filter, specifying the SSID of the network, which should be available for connection in the WiFi network list (white list): 1 To remove an SSID of a WiFi network from the block list: Run the command 1 netsh wlan set blockednetworks display = show After the previous command is executed, all Wi-Fi networks blocked with this filter appear in the list with a small cross icon (this. The output confirms that we are not connected to any wireless network. Let's now proceed to the next step and connect to a WiFi network. Step 2: Connect to WiFi on the terminal. Before connecting to a WiFi network, it's prudent to perform a scan on the terminal to search the available Wireless networks. To achieve this, run the command

How to connect, manage, delete Wi-Fi networks using

How to manage wireless networks using Command Prompt in

How To Show Available WiFi Networks, Their Channels

I would like to get a list of all the wireless networks. iwlist wlan0 scan | grep ESSID This will only show me the wireless network I am currently connected to. When I run the command as root, it shows me all the available networks. If I run the command without sudo quickly after this, all the networks will show up, but after a while they are all gone except the network I am currently. The wireless network report is one of the more useful tools in Windows 10 that can help you diagnose Wi-Fi connection problems. To create the wireless network report. In the search box on the taskbar, type Command prompt, press and hold (or right-click) Command prompt, and then select Run as administrator > Yes. At the command prompt, type netsh wlan show wlanreport. This will generate a.

See List of Wireless Network Profiles in Windows 10

This list shows you your saved wireless networks in the order they're prioritized. Windows will connect to the wireless network at the top first, if available, and then go down the list. If you could drag and drop wireless networks here, you'd be able to re-order the list. But Windows doesn't let you. If you don't want Windows to connect you to a wireless network in the future, you can. I cannot get Windows 7 to bring up the list of available wireless networks. Single clicking on the network icon in the notification tray does nothing. If I bring up the Network and Sharing Center and click Manage wireless networks, nothing happens. The wireless connection still works as long as I'm near an access point that was previously saved. Here is what I have tried so far: 1) Updated. Get a list of Wifi networks with PowerShell. Posted by OGrehan Posted On 2017-12-12 Views: 7346 Rating: You must be logged in to rate this post. Tags: Powershell Scripting Windows PowerShell Code Cache . Returns the parsed output of netsh wlan show network mode=bssid in psobject form. Does exactly what it says on the tin. Requires Vista/2008 or higher, or XP SP3 with a hotfix (I can't recall. This now requires .Net 4.6 at least. Also, I ported the functionality to C# using P/Invoke. I implemented this in a standalone repo for testing and then integrated it to winPEAS after making sure i.. When Display Wireless Networks button is clicked, the LIST of all detected wireless networks are displayed. The LIST is important for me. How can I reach this LIST using Win32 command through DOS command prompt? I think that if I could reach this LIST through Microsoft page, I also reach this LIST through Win32 command tool. But I do have no idea about which comand line do this operation.

Here is How to Find Passwords of All Connected Wi-Fi

How to connect to a Wireless WIFI Network from the Command line in Windows 7 then i disconnected the other wifi network i was connected to and up popped the same password box you get when you join any wifi network and BAM I am connected and posting on the hanselmasters site ;-) Gordon Arthur. July 27, 2011 22:10. Here is the security part of that template: <security> <authEncryption. If your wireless card is not listed above, it is likely supported only under Windows (some Broadcom, 3com, etc). For these, you can try to use #ndiswrapper. Utilities. Just like other network interfaces, the wireless ones are controlled with ip from the iproute2 package. Managing a wireless connection requires a basic set of tools

windows - How do I display a list of Wi-Fi connections

3) Scan and list available WiFi networks using nmcli command 'nmcli' is a command-line tool for controlling NetworkManager and reporting network status. It is used to create, display, edit, delete, activate, and deactivate network connections, as well as control and display network device status Some time ago I wrote an article about how list the Wifi networks using Delphi and the Native Wifi API, today I will show you how can you can gain access to even more info and stats about the Wifi Adapters and Networks in a local or remote machine using the WMI (Windows Management Instrumentation) and Delphi.. The WMI provides several classes to retrieve information about the WiFi networks and.

The only command that listed all wifi networks and their signal strength on an interface that doesn't support scanning according to iwlist wlan0 scan. - Cees Timmerman Apr 10 '20 at 15:57. Add a comment | 2. Actually are all commands (iwconfig, iwlist,) replaced with newest tool iw. to show signal and other info: iw wlan0 link where wlan0 is interface name. Share. Improve this answer. Scan for wifi Network. Introduction. Scan for and Connect to a Wireless Network from the Command Line. There are a multitude of fine, graphical wireless network configuration programs available to the Ubuntu community. However, there may come a day when you need to acquire a wireless connection from an unknown network on a strange network card from the recovery console. Or perhaps you just.

raspbian - Open the network list with command line

Setting up a wireless LAN via the command line - Raspberry

The tracert command in MS-DOS and Windows (known as traceroute in Unix-like operating systems) is a useful tool for diagnosing network issues. It displays a list of how a network packet travels through the network and where it may fail or slow down. Using this information you can determine the computer, or network device causing your. Here is a list of Linux tools used for wireless network monitoring tools that can be used from your laptop or desktop system to find out wifi network speed, bit rate, signal quality/strength, and more. Linux Commands: To Find Out Wireless Network Speed and Other Info. This page shows how to find the speed of the network interface using various commands on Linux. To see the speed of WLAN. Network List Manager policies. 04/19/2017; 5 minutes to read; D; m; g; J; a; In this article. Applies to. Windows 10; Network List Manager policies are security settings that you can use to configure different aspects of how networks are listed and displayed on one device or on many devices To start Network Shell and enter netsh at the command prompt or in Windows PowerShell, you can use the following command. netsh. Netsh is a command-line scripting utility that allows you to, either locally or remotely, display or modify the network configuration of a currently running computer. Used without parameters, netsh opens the Netsh.exe command prompt (that is, netsh>). Syntax. netsh.

Run the command to search the available WiFi networks. Now move down to look for your WiFi network. iwlist interface scan | less. Note: Where an interface is the network interface that you found using the above iwconfig command. Run the command - ip link set interface down Setup A Wi-Fi Using netctl: Before configuring a connection with netctl you must check the compatibility of your network. Scan for a Network. Before you can connect to your network, you need to find exactly what you're connecting to. If you already know the name of the WiFi network that you want to connect to, this section isn't necessary, but if you're trying to connect without knowing the SSID off hand, this will help you find it List Network Interfaces Using ip Command on Linux. Type the following ip command, enter: $ ip link show Here is what we see: $ 1: lo: mtu 16436 qdisc noqueue state UNKNOWN link/loopback 00:00:00:00:00:00 brd 00:00:00:00:00:00 2: eth0: mtu 1500 qdisc mq state UP qlen 1000 link/ether b8:ac:6f:65:31:e5 brd ff:ff:ff:ff:ff:ff 3: wlan0: mtu 1500 qdisc mq state DOWN qlen 1000 link/ether 00:21:6a:ca.

Added command-line options to export the wireless networks list into a file. Version 1.45: The 'Security' column now displays the security mode of the network - WEP, WPA-PSK, WPA2-PSK, and so on.... (Instead of Yes/No) Added Security Summary Mode. The 'Cipher' column now displays more accurate information. (Added TKIP+CCMP value) Updated the internal MAC addresses file. Version 1.40: Added. Wireless networks are also more vulnerable to hacking than the wired ones. Forget hacking, do you ever wonder that someone might be leeching off your hard paid wifi network? Maybe a neighbor who once connected to your network and now uses it as his/her own? It would be nice to check what devices are on your network. This way you can also see if there are some unwanted devices on your network. Neighboring wireless networks with a broadcasted SSID should be listed: Click on the desired network's name. If the network uses WPA encryption with a password (aka passphrase/pre-shared key), you will be prompted to enter it. After providing, click the Connect button. The wireless network connection will be activated

How can I get a list of available wireless networks on

Remove wireless network profile from command prompt. On Windows desktop, open command prompt as administrator by: Click Start icon at bottom left; Type cmd in search field; Right-click the cmd program; Select Run as administrator; Click Yes. On Command prompt window, type this command to list wireless network profiles that currently saved on Windows. netsh wlan show profiles: To remove a. In order to see associated wifi clients, even if they don't have a DHCP Client or have no ip, you have to ask the AP for associated wifi devices: # Universal (Tested with OpenWRT 14.07 and 15.05.X) iwinfo wlan0/wl0/ath0 assoclist # Proprietary Broadcom (wl) wl -i wl0 assoclist # Proprietary Atheros (madwifi) wlanconfig ath0 list sta # MAC80211 iw dev wlan0 station dum The above command lists all the network interfaces available in your system. The above output shows that there are three interfaces in the system: one loopback interface (lo) and two Ethernet interfaces (eth0 and eth1) are listed, along with other statistics. This command will also show some other useful information about the network interfaces, including IP address, status (UP or DOWN), MAC. Added /sort command-line option. Version 1.25: Added 'Very High' update rate. Added command-line options to save the current detected wireless networks to text/html/csv/xml file. Version 1.22: Fixed issue: When WirelessNetView window is hidden and there is an icon in the taskbar, running WirelessNetView again will open the existing instance of WirelessNetView, instead of creating another one.

Viewing Wireless Networks with PowerShell Legacy Commands

The Ethernet hardware address is listed under Ethernet Adapter Local Area Connection and the Wireless hardware address will be listed under Ethernet Adapter Wireless Network Connection. To close the Command Prompt window, enter the following at the C:\> prompt then press the Enter key: exi The easy way to do it on Windows is by using the Command Prompt utility. When you launch the utility, type the ipconfig command and press Enter. From there, you'll find your IP address under Default Gateway. On Mac, click on the WiFi icon in the menu bar and choose Open Network Preferences. In your Network settings, choose Wi-Fi from the left-side menu and click Advanced in the bottom-right. The second command gives you access to optional parameters for your particular card. iwconfig is used for the generic options available. If you run it without any parameters (sudo iwpriv wlan0), it lists all available options for the card. If no extra options exist, you will see output like this: wlan0 no private ioctls To set one of these private options, run: sudo iwpriv wlan0 private. WiFi during installation. If a WiFi connection is needed while installing Gentoo, note that the Gentoo minimal install CD has a limited number of drivers available, and provides only wpa_cli (and not wpa_gui) for configuring for WPA/WPA2/Enterprise connections.. If the minimal install CD does not contain the required drivers or the graphical frontend to wpa_supplicant is preferred, choose a.

Netsh WLAN Commands for Windows 10 - Find Wifi Key & More

As you see in the above output, I have two network interfaces namely enp5s0 (on board wired ethernet adapter) and wlp9s0 (wireless network adapter) on my Linux box. Here, lo is loopback interface, which is used to access all network services locally. It has an ip address of We can also use the same 'ifconfig' command in many UNIX variants, for example FreeBSD, to list available. The Raspberry Pi is a tiny and affordable computer that you can use to learn programming through fun, practical projects. Join the global Raspberry Pi community subscibe for more video

Hack WIFI Setting of Remote Windows PC

How To Manage A Wireless WiFi Network from the Command

  1. You can select the desired network using the Network: drop down list. You can also connect and disconnect using the relevant buttons. You can use the Managed Networks tab to edit and remove networks. Command line set up. If you aren't using the desktop then the WiFi can be configured using the command line. Raspbian should come.
  2. NirCmd is a small command-line utility that allows you to do some useful tasks without displaying any user interface. By running NirCmd with simple command-line option, you can write and delete values and keys in the Registry, write values into INI file, dial to your internet account or connect to a VPN network, restart windows or shut down the computer, create shortcut to a file, change the.
  3. key_mgmt - this defines if the wifi is either open, wep, wpa, wpa2. wep_key0= - If the wifi network is wep encrypted (older, now outdated), this is where you insert the password. = - If the network is wpa/wpa2 encrypted, you will enter the wifi password here; proto=RSN - This line will be added to wpa2 encrypted networks
  4. We can use ip address command to list Network Interfaces in Ubuntu Server along with the IP Address of Network port. ip address show. The output of the ip address show command should similar to the following screenshot. As you can see, Ubuntu ip address command list network interface with the IP Address that has been assigned. The ip address show command also can take the name of the interface.
  5. Which Win32 command in cmd prompt to give LIST of Wireless Network (too old to reply) Sezin Eren (s.eren@tetas.com.tr) 2007-07-05 12:46:06 UTC. Permalink. Hi, I add wireless network cart to my pc slot. I setup wireless area network and run regularly. My pc operating system is WINDOWS XP Service Pack 2. Network Connections -> Wireless Area Network -> (Right Click)Properties -> (Tab) Wireless.
  6. On a laptop I find it painful to go to the bottom-right corner of the screen to click on the wireless networks icon. I have not been able to open that window with a shortcut or command. I have seen the following suggestion posted elsewhere: rundll32.exe van.dll,RunVAN However, is this Vista · Make a shortcut C:\Windows\System32\rundll32.exe.
  7. Wireless interfaces are brought up and down with the wifi command. To (re)start the wireless after a configuration change, use wifi , to disable the wireless, run wifi down . In case your platform carries multiple wireless devices it is possible to start or run down each of them individually by making the wifi command be followed by the device name as a second parameter

You can also get a list of MAC addresses of network adapters. get-wmiobject Win32_NetworkAdapterConfiguration | format-table MacAddress, Description -autosize . Result: MacAddress Description ----- ----- 20:41:53:59:4E:FF RAS Async Adapter WAN Miniport (L2TP) 50:50:54:50:30:30 WAN Miniport (PPTP) 33:50:6F:45:30:30 WAN Miniport (PPPOE) Direct Parallel WAN Miniport (IP) 00:11:95:FA:C6:91 D-Link. How to Black List/White List Wireless Networks using Group Policy. Note: Steps 1 to 5 are common for setting up both black and white lists. Then the process branches and describes how to setup a black list then white list in steps 6 & 7. Step 1. This is a computer based setting so edit a Group Policy Object (GPO) that is targeted to all the laptops in your network . Step 2. Navigate to. *-network description: Ethernet interface product: RTL8111/8168 PCI Express Gigabit Ethernet controller vendor: Realtek Semiconductor Co., Ltd. physical id: 0 bus info: pci@0000:01:00.0 logical name: eth0 version: 06 serial: 10:1f:74:58:e1:04 size: 10Mbit/s capacity: 1Gbit/s width: 64 bit's clock: 33MHz capabilities: pm msi pciexpress msix vpd bus_master cap_list ethernet physical tp mii 10bt.

How To Block A WiFi Network In Windows 10How to Find the WiFi Password of a Past Connection UsingWiFi does not work after installing Windows 10 Update orHow to find the WiFi password in Windows 8FREEDOMFIGHTERS FOR AMERICA - THIS ORGANIZATIONEXPOSING

Wireless networks can be very convenient for businesses as they eliminate reliance on Ethernet cabling. Using Active Directory and Group Policy to configure and support Wireless in the enterprise. Internet & Networking. Networking. Strongest WIFI Network not showing in available list. Thread starter JimS_256; Start date Jun 30, 2014; Status This thread has been Locked and is not open to further replies. Please start a New Thread if you're having a similar issue. View our Welcome Guide to learn how to use this site. J. JimS_256. Thread Starter. Joined Jun 29, 2014 Messages 4. WLAN (wireless local area network) channels are frequently accessed using IEEE 802.11 protocols, and equipment that does so is sold mostly under the trademark Wi-Fi.Other equipment also accesses the same channels, such as Bluetooth.The radio frequency (RF) spectrum is vital for wireless communications infrastructure Go to System Preferences and select Network; Make sure WiFi (or Airport) is selected and highlighted and click the Advanced option at the bottom, on the right; You will find your security encryption type listed as Security under the WiFi tab; https://goo.gl/IT3gzl. WINDOWS PC. If you want to check your Wi-Fi's network encryption and you have a Windows Pc, take a look to the following. Where is the Control Panel in Windows 8 for Manage Wireless Networks? I want to work with my wireless profiles. Thanks · Open a run box window (or press win+R) then type cmd to open Windows 8 CLI. To see stored wireless profiles, type: netsh wlan show profiles This will show a list of saved profiles of your connected WLAN devices. Then you.

  • Du bist so lieb zu mir Englisch.
  • Stammstrecke Sperrung München.
  • Grundeinkommen beantragen.
  • Luxus Resort Malediven.
  • Immowelt Uedem.
  • COTTON on Wide leg jeans.
  • Safari & Baden Kombination.
  • USB Steckdose Motorrad anschließen.
  • Aushilfsjobs Karlsruhe ab 16 Jahren.
  • Haare transplantieren Erfahrung.
  • Laufen und fallen lassen SEALfit.
  • Jesaja Berufung.
  • Leerzeile.
  • Notdienst Apotheke Langenau.
  • Familienhotel Berlin mit Schwimmbad.
  • Shimano tl fc32.
  • Sinus coronarius Mitralklappenanulus.
  • Beliebteste Urlaubsländer der Welt.
  • Chris Noth Frau.
  • Gemüse dekorativ anrichten.
  • Sekretärin Öffentlicher Dienst Eingruppierung.
  • Krieg und Frieden Film 2016 Schauspieler.
  • Peters Stahl Schlagbolzen.
  • Lua hashmap.
  • Sprudelmatte badewanne Amazon.
  • Festmeter Brennholz Preis.
  • Elsa malen.
  • Weißes Zahngold.
  • Arduino stromstärke.
  • Cmd list wifi networks.
  • Samsung M2070 Scanner Software.
  • Gintama Soul Switch Arc.
  • BKH Weiß Point.
  • DIFFERENT Fashion.
  • Trend It up Nagellack Rossmann.
  • Convotherm AR 12.
  • Frescolino Plus Mini Kühlschrank.
  • Stolen life cast turkish.
  • Megamarsch Spezial.
  • Romulus und Remus Statue.
  • Yes in deed Deutsch.